friction stabilizer

friction stabilizer 1.Material: steel 2.Fuction :as rock bolt for strata support 3.Diameter : 33mm

 Split Sets Rock Bolt :(Friction Stabilizer) 

Split Sets Rock Bolt is used together with dome plate and net for reliable ground support in mines, tunnels, slopes, or wherever .

 

1.FEATURES :

(1)Split Sets Bolt is made from high strength steel tube that is a slotted steel tube, with one end tapered tip for easy insertion into a drill hole. The other end has a welded ring for holding the bearing plate. A ring, or collar, is welded on the outer end to hold a domed plate to the rock surface.

(2)The bolt is inserted into a hole slightly ,the diameter of hole is smaller than the tube. When drive the rock bolt into the hole, the tube of bolt is compressed and the slot is partially closed ,that make the strata and the bolt be a whole body,.all strain of bolt wiill support to the strata tightly. When surrounding rock is shaked by explosion, anchor capacity increasesed higher and supporting effect is perfect.

(3) Fast and easy installation with hand held or mechanized equipment .

(4) Be used in a variety of ground conditions for immediate ground support, but is not suitable for very soft strata and permanent support.

(5)Provide support in radial and axial direction .

2.Recommended hole diameter calculation:

(1)In The Rock Stratum :a

 Diameter of Hole: (0.9-0.95) × Diameter of Bolt

 Depth of Hole: Length of Bolt +100mm

 Deflection Rate of Drilling : <1%

(2)In The Coal Stratum:

 Diameter of Hole: (0.9-1.00) × Diameter of Bolt

 Depth of Hole: Length of Bolt +200mm

 Deflection Rate of Drilling : <1.5%

3.PROPERTY:

SERIES	SPECIFICATION	BEARING CAPACITY (kn)	HIGH-STRENGTH PLATE(Spherical)		LENGTH(mm)
			SIZE(mm)	BEARING CAPACITY (kn)
MF-33	33×2.5	100	120×120×5.0	≥100	914-3000
	33×3.0	120	120×120×6.0	≥120	914-300
MF-39	39×2.5	130	150×150×5.0	≥150	1200-3000
	39×3.0	150	150×150×6.0	≥180	1200-300
MF-42	42×2.5	140	150×150×5.0	≥150	1400-3000
	42×3.0	160	160×150×6.0	≥180	1400-300
MF-47	47×2.5	150	150×150×6.0	≥180	1600-3000
	47×3.0	170	150×150×6.0	≥180	1600-3000

SIZE	MF-33	MF-39	MF-46
Tapered Tip Diameter A	1-1/8” (28 mm)	1-3/16” (30 mm)	1-1/2” (38 mm)
Tapered Tip Length B	2-3/8” (60 mm)	2-1/2” (65 mm)	2-1/2” (65 mm)
Slot Width C	1/2” (13 mm)	5/8” (16 mm)	7/8” (22 mm)
Steel Thickness D	3/32” (2.5 mm)	3/32” (2.5 mm)	1/8” (3 mm)
Rod Diameter E	1-5/16” (33 mm)	1-1/2” (39 mm)	1-13/16” (46 mm)
Technical Data	FS-33	FS-39	FS-46
Hole Diameter	1-3/16” to 1-5/16”(31 to 33 mm)	1-3/8” to 1-1/2”(35 to 38 mm)	1-11/16” to 1-3/4”(43 to 45 mm)
Bolt Lengths	3’ to 8’(0.9 to 2.4 m)	3’ to 10’(0.9 to 3.0 m)	3’ to 12’(0.9 to 3.7 m)
Tensile Strength	24,000 lbs(107 kN)	28,000 lbs(124 kN)	40,000 lbs(178 kN)
Yield Strength	16,000 lbs(71 kN)	20,000 lbs(89 kN)	30,000 lbs(133 kN)
Initial Anchor Capacity	3 to 6 tons(27 to 53 kN)	3 to 6 tons(27 to 53 kN)	6 to 10 tons(53 to 89 kN)
Ultimate Axial Strain	Typical 16%

friction stabilizer